SN1 Series Semi-Straight Side High Precision press
SNl (semi-straight side high-precision powerful weld structure presses) -- widely used fore press and punching,shaping in the departments of electronic,telecommunication, computers, household electric appliances, furniture, transportation (automobiles, motorcycles, bicycles), metal parts stamping and molding.
● High rigidity
High-rigidity,S-straight side frame,even loading within structural parts,balanced rigidity,ensure the accurate and stability in pressing.
● Balance centre of gravity
In same center of slide board balance device and slid board,guarantee machine running in smooth,and the replaced slide board bears even force ensuring the high-precision running in stable.
● High-precision
Semi-straight side frame,further fit high precision constant mould press
● Automatiztion processing
Can equip all automatic feeders for automatization production,reduce the cost,promote efficiency.
● Environment-friendly, energy saving
Attractive appearance, low noise, low consumption, save energy, reflected the advanced design ideas by smooth and simplification appearance.
MODEL | SN1-110 | SN1-160 | SN1-200 | SN1-260 | ||||||||||||
Item | S | H | L | S | H | L | XL | S | H | L | XL | S | H | L | XL | |
Capacity | ton | 110 | 160 | 200 | 260 | |||||||||||
Rated Tonnage point | mm | 5 | 3.2 | 5 | 6 | 4 | 6 | 6 | 4 | 6 | 6.5 | 4 | 6.5 | |||
Stroke Length | mm | 110 | 70 | 180 | 130 | 80 | 200 | 250 | 150 | 100 | 200 | 250 | 180 | 100 | 250 | 300 |
Stable Speed | s.p.m | 70 | 90 | 50 | 60 | 80 | 45 | 50 | 65 | 35 | 45 | 55 | 30 | |||
Speed Changing | s.p.m | 45-90 | 60- 130 | 30- 65 | 40-75 | 50- 110 | 20-50 | 20- 45 | 30-60 | 40- 90 | 20-50 | 20- 40 | 30-50 | 35- 75 | 20-40 | |
Die Height | mm | 320 | 340 | 350 | 350 | 375 | 450 | 410 | 435 | 450 | 460 | 500 | 500 | 540 | ||
Maximum Counter balancer Capacity | Kg | 610 | 700 | 800 | 800 | |||||||||||
Slide Adjustment | mm | 90 | 100 | 110 | 120 | |||||||||||
Bolster Area (L.RxF.B.) | mm | 900× 520 | 900× 700 | 1000× 580 | 1000× 750 | 1150× 650 | 1150× 850 | 1300× 700 | 1300× 900 | |||||||
Slide Area (L.RxF.B.) | mm | 650×520 | 700×580 | 850×650 | 920×700 | |||||||||||
Side Opening (L.RxF.B.) | mm | 470× 570 | 500× 750 | 510× 630 | 560× 800 | 610× 800 | 570× 700 | 610× 900 | 620× 750 | 660× 950 | 700× 950 | |||||
Air Pressure | Kg/cm2 | 6 | 6 | 6 | 6 | |||||||||||
Stable Speed | HP×p | 10×4 | 15×4 | 20×4 | 25×4 | |||||||||||
Speed Changing | HP×p | VS 15×4 | VS 20×4 | VS 25×4 | VS 30×4 | |||||||||||
Slide Adjusting Motor | HP×p | 0.5×4 | 1×4 | 1×4 | 2×4 | |||||||||||
Die Cushion | ||||||||||||||||
Capacity | ton | 8 | 10 | 14 | 14 | |||||||||||
Pad Area (L.RxF.B.) | mm | 500×300 | 540×350 | 640×470 | 700×470 | |||||||||||
Stroke | mm | 80 | 80 | 100 | 100 |
Accessories
配置 | Accessories | Standard标准 |
油压式超载保护装置 | Hydraulic Over-load Protector | ○ |
电动式滑块调整装置 | Slide Adjust Device | ○ |
电动式模高指示器 | Die Height Indicator | ○ |
滑块及模具平衡装置 | Balance Device | ○ |
电子凸轮开关 | Rotary Cam Switch | ○ |
曲轴角度速度显示器 | Crank Angle Indicator | ○ |
电源插座 | Power Supply | |
○ | ||
计数器 | Electrical Stroke Counter | |
预裁计数器 | Preset Counter | ○ |
预断计数器 | Preset Counter | ○ |
空气源接头 | Air source Receptacle | ○ |
二度落保护装置 | Over-run Safety Device | ○ |
维护工具及工具箱 | Maintenance Tool Box | ○ |
使用说明书 | Operation Manual | ○ |
机 种 | SN1-110 | SN1-160 | SN1-200 | SN1-260 | |||||||||||
型 式 | S | H | L | S | H | L | XL | S | H | L | XL | S | H | L | XL |
A | 1365 | 1500 | 1690 | 1910 | |||||||||||
B | 2985 | 3050 | 3410 | 3495 | 3570 | 3790 | 3865 | 3880 | 4230 | 4315 | 4405 | ||||
C | 900 | 1000 | 1150 | 1250 | |||||||||||
D | 520 | 700 | 582 | 750 | 650 | 850 | 700 | 900 | |||||||
E | 600 | 700 | 850 | 1000 | |||||||||||
F | 520 | 580 | 625 | 700 | |||||||||||
G | 840 | 915 | 1020 | 1100 | |||||||||||
H | 430 | 410 | 530 | 480 | 455 | 600 | 700 | 560 | 530 | 650 | 700 | 640 | 600 | 750 | 840 |
I | 940 | 1050 | 1200 | 1300 | |||||||||||
J | 870 | 700 | 630 | 800 | 700 | 900 | 750 | 950 | |||||||
K | 470 | 500 | 510 | 560 | 610 | 570 | 610 | 620 | 660 | 700 | |||||
L | 1440 | 1530 | 1605 | 1695 | 1770 | 1870 | 1850 | 1950 | |||||||
M | 1175 | 1310 | 1490 | 1680 | |||||||||||
N | 1950 | 2040 | 3305 | 2290 | 2480 | 2680 | 2045 | 2745 | |||||||
O | 1475 | 1770 | 1960 | ||||||||||||
P | 1430 | 1495 | 1550 | 1600 | 1650 | 1618 | 1683 | 1707 | |||||||
Q | 3225 | 3290 | 3495 | 3590 | 3675 | 3900 | 4040 | 4290 | 4375 | 4550 |
PRODUCTS
- CN1 High preeision Compact power press
- CH1 Series High speed Precision Compact Power pres
- SN1 Series Semi-Straight Side High Precision press
- CN2 Series Donble Crank press
- TNX STRAIGHT Side Double Crank press
- TN1 Series Colunar Straight single crank press
- TK1 Toggle press
- TN2 Two-point press
- TN4 Four-point press
- TH2 closed type high speed precision press
- SH1 series of semi closed type high precision high-speed punch
- SL1 series of semi closed type high precision connecting rod punch
- TH1 closed high precision high-speed punch
- Single Crank Precisionsteel Frame Press